Setup Network Auto-discovery

This is a very quick write-up on setting up network auto-discovery and we would soon be updating this.

Detailed description with images is now available at: http://docs.device42.com/tools/setup-network-auto-discovery/

Go to Tools > Auto-discover >  Networking.

Add the switch/router with snmp information, save and click run now.

You can go  back to switch view and see the task status. This might take a while to run. Once it finishes you should see 'success' or error messages and if it is successful, you would see IP addresses , MAC addresses and switch ports updated.

You can schedule this as well, similar to DNS auto-discovery.